| Customization: | Available |
|---|---|
| After-sales Service: | One Year Free Parts |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Purpose:
PT-D1298-1884 Petroleum Products Density Tester is designed and made as per the National Standard GB/T 1884-2000 "Test Methods for Density of Petroleum and Liquid Petroleum Products (Densimeter Methods)". It is suitable to determine density of liquid petroleum products using a densimeter.
Working condition:
1. Ambient temperature: -10°C ~ +40°C; the temperature should not change for more than ±2°C;
2. Relative humidity: ≤85%;
3. The instrument should be placed on a flat workbench during operation and please try your best to reduce air convection during a test.
4. If the instrument is not used for a long time, please store it at a dry place.
Technical parameters
1. Power supply: AC 220V±10%, 50 Hz;
2. Cubage of bath: Ф300×380 mm;
3. Heating power: 700 W; 1000 W;
4. Temperature controller:
(1) Temperature controlling range: 0°C ~ 100°C;
(2) Temperature controlling accuracy: ±0.2°C;
(3) Temperature sensor: Industrial platinum resistance Pt100;
5. Thermometer: total immersion mercury thermometer with scale division of 0.2 °C;
6. Capacity of cylinder: 500ml
7. Dimension: 560mm×380mm×580mm
Standard Accessories
| No. | Item | Unit | Qty |
| 1 | Thermometer (-20 ºC~102 ºC, scale division is 0.2 ºC) | Piece | 1 |
| 2 | SY-05 Density meter (10 pieces in a group) | Set | 1 |
| 3 | Sensor | Piece | 1 |
| 4 | Thermometer stopper (3#) | Piece | 2 |
| 5 | 500 ml test tube | Piece | 2 |
| 6 | Stopping ring for thermometer (1#) | Piece | 4 |
| 7 | Rubber stopper (21#) | Piece | 1 |
| 8 | Fuse 10A (Φ5×20) | Piece | 2 |
| 9 | Sample tube holder | Piece | 2 |
Other related products:
){kind=link}