Customization: | Available |
---|---|
After-sales Service: | Free Spare Parts |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Standard components
Item No. | Description | Quantity |
1 | USB digital CCD camera | 1 pcs |
2 | continuous variable power optical system | 1 unit |
3 | manually controlled knob injection system | 1 unit |
4 | manual CCD tilt platform | 1 pcs |
5 | image analysis measurement system software | 1 set |
6 | Instructions and Operation Manual electronic edition | 1 set |
7 | 50 l micro-injector | 1 pcs |
8 | 100 l micro-injector | 1 pcs |
9 | disposable injector | 2 pcs |
Parameters
1, the contact angle measuring range: 0 to 180 degrees
2, the contact angle measurement Resolution: 0.01 degrees
3, the surface tension measurement ranges (the hanging drop method): 0 ~ 2000mN / m (mN / m)
4, sample stage control
a) Move back and forth manually, stroke 50mm, 0.1mm accuracy
b) Move around manually, stroke 50mm, 0.1mm accuracy
c) Moving up and down manually, stroke 25mm, 0.1mm accuracy
d) Leveling feet to adjust the horizontal platform level
e) Sample table size 70mm × 100mm, without temperature control system
5, the injector control
a) Manually moving the upper and lower part: the rack stroke 25mm, 0.1mm accuracy
b) Manual knob controlled injection system
6, CCD optical system
a) Optical zoom 0.7-4.5 × continuous zoom (zoom only parameters, as well as built-in amplification rear mirror) image magnification: 50-318piexl / mm
b) Speed CCD line parameters USB2.0 standard industrial CCD25 700 frames / sec (optional higher-speed CCD)
7, backlight control
a) Tunable monochromatic light source LED cold light source
b) The front and rear lens adjustment manual stroke 10mm, 0.1mm accuracy
c) Up and down to adjust the lens manually, stroke 10mm, 0.1mm accuracy
d) A plan to adjust the lens manually tilt platform
8, the software part
a) half-angle protractor measurement method, half-width hypsometry, automatic measurements, five-point fitting
b) Dynamic measurement automatically trigger video Video Speed: 25 frames / sec.
c) Storing interval 1-3600 seconds optional
d) Dynamic contact angle advancing angle and receding angle, for measuring the roll angle should be optional 360-degree rotating platform
e) Comparing the left and right angle calculated and averaged around corner
f) The amount of the droplet control software control, accuracy of 0.1 microliters (with optional automatic precision injection device)
g) The surface free energy Owens two-liquid method (otherwise optional)
Contact angle measurements h) curved convex surface correction
i) The software upgrade free upgrades for life
9, the instrument is included in the overall structure of the seven-dimensional movement of the adjustment mode
Supporting computer:
SI-CAM2000D1 type contact angle measuring instrument must combine with a computer .If users buy computers by themselves or use the original requirements, the configuration requirements are as follows: WinXP operating systems or 32-bit Win7 operating system, a empty USB interface.
Expanding component
Contact angle measuring instrument is a commonly used instrument in universities, research institutes and manufacturing enterprises. Based on user test conditions, objects, corresponding to the requirements of different model range, difficult for users to choose. Most business models are developed according to the price ,classified into the high ,medium and low price ,various additional functions bundled in these modules, users need for their own functional components are often forced to accept unnecessary components.
First with "menu" selection method, the modular design of the SI-CAM2000D series contact angle measuring instrument has excellent scalability. Its standard SI-CAM2000D1 type contact angle measuring instrument, including very complete basic functions, regardless of the user in the pre-sale or need to add additional functionality can be found in 22 optional component free "a la carte" checks.
For example, a user initially optional for temperature and pressure measurement standard SI-CAM2000D1 type contact angle measuring instrument, need to test crude oil, resin and other samples required high temperature conditions over a year,, the instrument doesn't need to change, just need to add 200 degrees or 400 degrees thermostat assembly.
Optional components:
1. Standard SI-CAM2000D series contact angle measurement (SI-CAM2000D1)
2. Automatic exact sampler loading(software control, accuracy of 0.1 microliters, nanoliters minimum 7)
3. Imported high-speed CCD - 100 frames / sec
4. Precision auto sampler loading pump (control software, precision 0.01 microliter, nanoliter minimum 7, the first two can not use at the same time)
5. Manual sample platform 360-degree vertical rotation (roll angle measurable)
6. Manual and auto integrated vertical rotating the sample platform (measurable roll angle)
7. Manual sample platform 360-degree horizontal rotation
8. Manual vertical swing arc sample platform (plus or minus 15 degrees)
9. The overall rotation mechanism
10. Electric heating platform: Japan's Omron thermostat controlled heating, room temperature ~ 200 ºC, room temperature ~ 400 ºC
11. The liquid - liquid - solid contact angle measuring cell
12. The flapper law, the bubble trapping method Accessories
13. Electric X, Y platform
14. The all-electric 3D platform (X, Y and platform focusing)
15. The High zoom optical system and CCD camera (imported from Japan, 0.9-8 × continuous variable)
16. Optional 50ul / 100ul micro-injector, disposable micro-injector and fixture
17. The fabric trampoline
18. The fiber measurements Bracket
19. The peristaltic pump (second injection means)
20. The image analysis software to automatically measure the contact angle (beta) is temporarily free
21.HY-12 infrared tablet press
22.HF-12-type compression mold (diameter ф13mm thickness 0.1 ~ 0.5mm)
23.HF-12-type compression mold (made in any diameter thickness 0.1 ~ 0.5mm)